Checked November 17, 2026

Class B Contractor License in Colorado

A Class B contractor license in Colorado lets you build commercial buildings up to a limit your city or county sets, usually a height, a story count or a construction type. Below are the lines 18 cities and counties draw, the ICC exam each asks for, the experience they want, and how Class A differs.

A framer in a hard hat walks the top of a newly framed wood wall against a blue sky

What a Class B license covers

A Class B general contractor license is the middle class, above residential Class C and below unlimited Class A. Denver lets a Class B contractor build, alter or repair any building below a high rise.

Colorado has no state general contractor license, so each city or county writes its own Class B. Some use stories, some use construction type, and Fort Collins and Colorado Springs split the class in two.

AGeneral

Any building or structure

Denver asks for seven years of commercial experience, including high-rise work over 75 feet.

BBuilding

Buildings below a high rise

Denver asks for four years of commercial experience, including ground-up work on buildings 55 to 75 feet high.

CResidential

One- and two-family homes and townhouses

Denver asks for two years of field work. See Class C contractor license in Colorado.

Scope and experience wording from Denver’s construction certificates page.

Last checked November 2026. Cities change their rules, and this guide isn’t updated automatically. Confirm with your building department before you apply or book an exam.

Class B contractor license requirements in 18 cities and counties

Each name links to the page we read. Fees are for a new Class B license. The first 11 rows were read on November 13 and re-read on November 17, 2026. The rest were added on November 17. Confirm with the building department before you apply.

City or countyWhat Class B may buildExamLicense fee
DenverAny building below a high rise, as the building code defines it. A separate B-2 certificate covers buildings up to 30 feetF12$250
Colorado Springs and El Paso CountyPikes Peak Regional Building DepartmentClasses B-1 and B-2. B-1 excludes assembly, school, institutional and hazardous occupancies and Type I constructionG12$175
ArvadaAny building below a high riseF12 at minimum, or a license from a Colorado city where you tested$200
ThorntonUp to three stories, no Type I constructionF12 or G12, or a reciprocal license$150
BoulderCommercial and residential buildings of Type V, IV, III-B and II-B constructionF12 or G12, per the city’s license guide$307 a year
LovelandResidential and non-residential structures up to three storiesICC Building Contractor (B), or a reciprocal license$150 for two years
LongmontAny building except Type I-A or II-A constructionAn ICC certificate on the current code or one cycle back$125 a year
Jefferson CountyCommercial buildings and dwellings up to three storiesG12$50 a year
Larimer CountyCommercial buildings and dwellings up to three storiesG12, or a tested license from another Colorado city or county$125 for two years
CentennialType III, IV and V construction in occupancy groups A, B, M, R, S and UA Class B ICC test, or a current Aurora or Denver license$155
ParkerType III, IV and V construction in occupancy groups A, B, M, R, S and UG12$175
LakewoodClass A-2 Limited Commercial: two-story commercial or four-story residential buildingsNone. Lakewood registers contractors$150 the first year
Douglas CountyHighlands Ranch includedClass B: multi-family buildings of three or more unitsNone. “Douglas County has no testing requirements”$200, waived in unincorporated areas
EnglewoodClass B. Scope not stated on the fee pageAn ICC exam when the city asks for one$150
Commerce CityClass B. Scope not statedAn ICC exam or a reciprocal license$81
BrightonClass B. Scope not statedAn ICC exam$100
Castle PinesClass B. Scope not statedProof of testing, or a license from a testing jurisdiction$125
Boulder CountyUnincorporated areasClass BF12 passed within three years, or a listed jurisdiction’s license$300 for three years

Two cities work differently. Aurora issues one Commercial Building Contractor license that takes an ICC General Building Contractor “A” or “B” certification ($392). Fort Collins asks for the G11, the Class A exam, for its own Class B, and the G12 for its Class C1 and C2 licenses.

The experience Class B and Class A applicants must show

Commercial classes ask for more proof than Class C, and the proof has to show the right role. Denver wants Class A and B letters to list you as General Superintendent, Lead Superintendent or Project Engineer, on projects from the last 15 years. Letters from your own officers, members or subcontractors do not count.

City and classExperience it asks for
Denver Class BFour years of notarized commercial experience, including ground-up work on buildings 55 to 75 feet high
Denver B-2Four years of notarized commercial experience, including ground-up work on buildings up to 40 feet high
Denver Class ASeven years of notarized commercial experience, including ground-up high-rise work over 75 feet
Fort Collins Class AThe G11 and three verified projects: new buildings over five stories, other than residential
Boulder Classes A and BYour education, training or years of experience in non-residential construction. The city can refuse the license if it does not apply
Aurora Limited Building CommercialRegistration and three years of documented experience. $164 license plus $131 supervisor license

The Class B exam: ICC G12

Cities that test for Class B use ICC’s General Building Contractor (B) exam. Like the residential exam it is open book and taken at a Pearson VUE testing center, but it adds the International Building Code and a Concrete Manual.

Class A uses the General Building Contractor (A) exam, the G11: 90 questions in four hours.

The ICC G12 at a glance
Questions80, multiple choice
Time limit4 hours
Books2018 IBC, 2018 IRC and a Concrete Manual, open book
Fee$120 through Pearson VUE
ResultsOn screen when you finish
RetakeICC makes you wait 10 days

From ICC’s 2018 National Contractor/Trades Examination Bulletin, October 2026.

  1. F122015 codesRetires December 1, 2026

    Denver and Boulder County name only this edition for Class B.

  2. G122018 codesAvailable

    The edition most cities name.

  3. T122021 codesOpens December 1, 2026

    No city in the table names it yet.

Source: ICC contractor and trades bulletins, published October 12, 2026.

G12, T12, G11 and T11 side by side

ICC’s bulletins list the books and the share of the exam each topic takes. The G12 percentages print as 102% in total, so read them as rough weights. Structural systems is the biggest block on both 2018 exams. The 2021 versions cut it to 30% or 35% and nearly double the building envelope share.

ExamCodesFormatBooks ICC listsOutline
G12201880 questions, 4 hours2018 IBC, 2018 IRC and a Concrete Manual, on the 2021 IBC and ACI 318-19 or the 2015 IBC and ACI 318-14Permits and general regulations 21%, building planning and life safety 31%, structural systems 42%, building envelope 8%
T12202180 questions, 4 hours2021 IBC, 2021 IRC and the Concrete Manual on the 2021 IBC and ACI 318-19Permits 20%, planning and life safety 30%, structural 30%, envelope 15%, trade systems 5%
G11201890 questions, 4 hours2018 IBC and either Concrete Manual. No IRCPermits 19%, planning and life safety 31%, structural 42%, envelope 8%
T11202190 questions, 4 hours2021 IBC and the 2021 Concrete ManualPermits 15%, planning and life safety 35%, structural 35%, envelope 15%

ICC’s 70% and 75% versions of the 2021 exams are separate exams and not interchangeable.

What a Class B contractor license in Colorado costs

The exam is $120 each attempt. The license fee runs from $50 a year in Jefferson County to $307 a year in Boulder. Denver adds a $60 supervisor certificate, and Colorado Springs adds a $50 application fee.

Insurance is separate, and commercial work usually needs the full $1 million. The state requires workers’ compensation when you have employees and can fine you up to $500 for each day without it.

City or countyGeneral liability minimum for Class B
Colorado Springs and El Paso CountyPikes Peak Regional Building Department, Boulder and Littleton$1 million per occurrence, $2 million aggregate
Longmont$1 million combined single limit, $2 million aggregate, $2 million products completed
Loveland, Castle Rock, Larimer County, Douglas CountyHighlands Ranch included and Parker$1 million
Boulder CountyUnincorporated areas$600,000 per occurrence
ThorntonNo certificate required since February 13, 2023
Denver, Aurora and Jefferson CountyNot stated on the pages we read

ICC G12 prep with Contractors of Colorado

We prepare contractors for the ICC G12, the Class B exam, alongside our G13 and G14 classes. Our classes run in Lone Tree, Loveland and Colorado Springs, and every class can be taken fully online by live stream. Book an intro meeting and we will tell you the next G12 dates and what is included.

Before you book, check the city table on this page to see whether your city names the G12, an older F12 or no exam at all.

Questions about Class B and Class A

How is a Class A contractor license different from Class B?

Class A has no size limit. Class B stops at a line the city sets: below a high rise in Denver and Arvada, three stories in Thornton, Loveland, and Jefferson and Larimer counties.

How much experience does a Class B license take?

Denver asks for four years of notarized experience building commercial buildings. Boulder asks Class A and B applicants to show education, training or years of experience in non-residential construction. Many other cities do not state a number.

What is a B-2 certificate in Denver?

A narrower Class B certificate for buildings whose highest floor or occupiable roof is 30 feet or less above fire department access. It takes the same F12 exam and four years of experience, including ground-up work on buildings up to 40 feet.

Can a Class B contractor build houses?

In the cities we checked, yes. The Class B scope sits above Class C, and several cities name residential buildings in it, including Boulder, Loveland, and Jefferson and Larimer counties.

Which class do I need for an apartment building?

It depends on the city. Douglas County puts buildings with three or more units in Class B. Colorado Springs lets its Class C build up to eight units and two stories, and its B-2 up to 16 units and two stories.

Do you teach an ICC G12 class?

Yes. We prepare contractors for the ICC G12 as well as the ICC G13 and the ICC G14. Book an intro meeting for the next G12 dates.

Is the F12 still accepted?

ICC retires the F12 for new registrations on December 1, 2026. Denver’s page names only the F12 for Class B and had not posted a change when we checked on November 17, so ask before you register.

Contractors taking notes during a Contractors of Colorado exam prep class

Start with the license guide

See how classes A, B and C work across 28 Front Range cities and counties.