
Our ICC G14 roofing exam prep in Colorado is a four-Saturday class in Lone Tree for the ICC G14 roofing contractor exam. Page Dyer, a licensed roofer, teaches it in person, and you can take it fully online by live stream.
ICC splits the G14 into four areas. Every answer is somewhere in the three books you bring in. With 60 questions in three hours you have about three minutes for each one, so you need to know where to look before you sit down.
÷
=
ICC’s bulletin warns you will not have time to look up every answer.

Administration, code definitions and terms, and job planning and setup.

Shingle roofing, plus flat roofs with hot mopping and other membranes.

Fasteners, flashing and accessory materials, roof drains, gutters and scuppers.

Tearing off old roofing or adding a layer, and repairing the roof structure underneath.
Exam format and outline from ICC’s 2018 National Contractor/Trades Examination Bulletin, October 2026.
ICC prints the weights for both editions. The G14 numbers add up to 103% as printed, so treat them as rough. The T14, on the 2021 codes, moves weight from administration and re-roofing to fasteners, flashings and drainage.
| Content area | G14 (2018 codes) | T14 (2021 codes) |
|---|---|---|
| Administration and general requirements | 28% | 20% |
| Roofing materials and application | 35% | 35% |
| Fasteners, flashings, drainage and scuppers | 28% | 35% |
| Re-roofing | 12% | 10% |
Both editions have 60 questions in three hours and list the IBC, IRC and IPC of their code year. ICC’s October 2026 change log lists an updated G14 time limit; the bulletin still prints three hours.
Last checked November 2026. Cities change their rules, and this guide isn’t updated automatically. Confirm with your building department before you apply or book an exam.
Page Dyer leads the course, and the test-taking strategy you practice was built by a working roofer.
The class meets in a classroom in Lone Tree with your books open in front of you, and every session is live streamed for students who join online.


The class is built on the 2018 International Building Code (IBC), International Residential Code (IRC) and International Plumbing Code (IPC), the three books ICC lists for the G14. Roof drains, gutters and scuppers share an outline area with fasteners and flashings, so expect drainage questions alongside the shingle questions. You get all three, each with its own tab kit, in the price.
Your tabs and your instructor’s strategy are how you find the right page fast.
All three are ICC’s roofing contractor exam. The letter tells you the code edition. On December 1, 2026, ICC retires the F14 for new registrations and opens the T14. The G14 stays available, and ICC has not published a date for retiring it.
Your building department decides which exam ID it accepts, so ask before you buy books.
ICC stops taking new registrations.
The exam our class teaches. No retirement date published.
60 questions in 3 hours, sold in a 70% and a 75% passing score version.
The three editions of ICC’s roofing contractor exam. Source: ICC contractor and trades bulletins, published October 12, 2026.
All three code books must meet ICC’s rules, so set up your tabs and notes before you start practicing with them.
| Book the exam | Online at pearsonvue.com/ICC, or by phone at 1-877-234-6082. National contractor exams need no pre-approval, and you can book as late as the day before if a seat is open. |
|---|---|
| Bring one ID | An original, unexpired, signed government photo ID whose name matches your registration exactly. A temporary license is not accepted, and a mismatch means no test and no refund. |
| Books you may use | Bound books, a three-ring binder or stapled pages. No photocopies of copyrighted books. |
| Notes and tabs | Notes in ink or highlighter are allowed. Tabs must be permanently attached, the kind that tear the page if you pull them. No loose papers, and nothing slipped between the pages. |
| Calculator | A battery-powered, basic four-function calculator. No construction calculators and none that store formulas or print. |
| Rescheduling | Change the date at least two business days ahead. Later than that, you pay the full exam fee. |
| Results | On screen as soon as you finish. |
| Retakes | Wait 10 days after a failed attempt and pay the fee again. ICC sets no limit on attempts unless your licensing board does. |
From ICC’s candidate rules, support pages and 2018 bulletin, read November 17, 2026.
We found no ICC or Pearson VUE page that offers the G14 by remote proctoring. Pearson’s ICC contractor page offers testing centers only.
We read 28 Front Range building departments on November 17, 2026. This is what each one names for roofing. None names the T14 yet.
| What the city names | Cities and counties |
|---|---|
| G14 by name | Aurora (on its exam sheet), Colorado Springs for the D-1 license, Jefferson and Larimer counties |
| G14 or F14 | Thornton, Commerce City (G14-N or F14-N), Parker (G14, G15, F14 or F15) and Boulder for commercial roofing |
| F14 only | Boulder County, and Centennial (F-14 or W-14). Ask both what they will take after December 1 |
| Two answers | Fort Collins: its application packet names the G14, while its web page still names the F14 |
| An ICC test, no exam ID | Arvada, Loveland, Castle Rock, Littleton, Wheat Ridge and Castle Pines |
| No roofing exam | Denver, Longmont, Douglas County, Englewood, Golden, and Boulder for residential roofing |
The F14 retires for new registrations on December 1, 2026. Our roofing license guide has each city’s fee, insurance minimum and re-roof permit rules.

Each building department sets its own rules. Aurora, for example, lists the ICC Roofing Contractor certification as a requirement for its roofing contractor license.
Our page on getting a roofing license in Colorado covers the city rules.
“Do you require the ICC G14 (Roofing Contractor) exam for licensure?” Ask for the exact exam ID.
Four Saturday afternoons with the books, tabs and portal.
Schedule it through Pearson VUE. You see your result when you finish.
Send your exam result and whatever else your department asks for.
No. Any school that promises a guaranteed pass is not being honest, because you are the one sitting the exam. If you attend every class, finish the full portal curriculum and do not pass on your first attempt, you can attend a future session at no additional cost.
Sixty, all multiple choice with four options. You have three hours and the exam is open book. If you need a retake, ICC makes you wait 10 days.
Ask your building department what it accepts. ICC’s 2018 bulletin points to its Exam Catalog for the G14 score, and ICC’s support page says most contractor exams require at least 70% correct. The newer T14 is sold in two versions, 70% and 75%, and the score is part of the exam ID.
Yes, if the tabs are permanently attached and your notes are in ink or highlighter. Removable sticky tabs, loose papers and photocopied pages are not allowed.
We found no ICC or Pearson VUE page that offers it. Plan to test at a Pearson VUE testing center.
You wait 10 days and pay the $120 fee again. ICC sets no limit on attempts unless your licensing board does.
No. Denver’s roofing certificates require no test. You document two years of field experience with 24 projects from 24 different months, in notarized letters.
Yes. Every session is live streamed from Lone Tree, so you can take the whole class online.
No. The G14 uses the 2018 codes and the T14 uses the 2021 codes. This class teaches the G14. Our ICC T13 exam guide covers the 2021-code exams, including the T14.
Generally yes. Many departments want documented experience before they issue the license. Ask yours what it requires.
Many jurisdictions across the country follow ICC codes and require the G14. Our class covers the 2018 IBC, IRC and IPC, so it prepares you for the exam wherever it is required. Confirm the exam with the local authority before you enroll.
We strongly recommend attending every session, since each one builds on the last. If a conflict comes up, tell your instructor 48 hours ahead. Enrollment is final, and we do not refund missed sessions.

Residential builders take a different exam. Our ICC G13 exam prep class prepares you for the Class C residential exam.
Contractors of Colorado also runs a membership for Colorado contractors and holds networking events through the year.

Four Saturday afternoons in Lone Tree or by live stream. The class costs $2,499 with three code books, tab kits and the portal included.