ICC G13 License Exam Prep in Colorado

G13 license exam prep in Colorado is a four-Saturday class for the ICC G13, the exam many Colorado cities ask for before they issue a Class C residential contractor license. Licensed contractors who have passed the test teach it in Lone Tree, Loveland and Colorado Springs, and you can take the whole class online by live stream. (We are adding a T13 class for the 2021-code exam too.)

A student reading the code book during a Contractors of Colorado G13 exam prep class

The 2018 IRC and class handouts on a desk in a Contractors of Colorado classroom

What the G13 license is

G13 is the name of an exam. Its full title is ICC Residential Building Contractor (C), and it is written against the 2018 International Residential Code. Contractors call it the G13 license because passing it is the main step toward a Class C residential contractor license.

Colorado has no statewide general contractor license. Cities and counties issue them, and many ask for this exam before they license you for residential work. Fort Collins names the G13 for its residential classes, and Aurora requires the ICC Residential Building Contractor “C” certification.

Our page on the Class C contractor license in Colorado shows what a few cities ask for.

The G13 at a glance
Full nameICC Residential Building Contractor (C)
Leads toA Class C residential license from your city or county
Questions80, multiple choice
Time limit4 hours
Book2018 International Residential Code, open book
Fee$120 through Pearson VUE
ResultsOn screen when you finish
RetakeICC makes you wait 10 days

From ICC’s 2018 National Contractor/Trades Examination Bulletin, October 2026.

Last checked November 2026. Cities change their rules, and this guide isn’t updated automatically. Confirm with your building department before you apply or book an exam.

What the ICC G13 exam covers

ICC splits the 80 questions into four areas. Half of the exam is structural.

The exam is open book, but 80 questions in four hours leaves about three minutes a question. A book you cannot navigate does not help. We teach you where things live in the code, how to tab your book so you reach them in seconds, and how to read what a question is asking before you turn a page.

ICC’s bulletin warns you will not have time to look up every answer.

Wood roof trusses on a new house frame against a blue sky
50%

Structural systems

Footings and foundations, concrete, floors, wall framing and stairs, roof-ceiling construction and masonry.

House plans spread on a desk with tape and pens
19%

Permits and general regulations

Regulations and job planning, plus code definitions and terms.

The framed interior of a new house with floor joists overhead and window openings
19%

Building planning and life safety

Smoke alarms and fire protection, occupancy needs and interior environment, exits and egress.

A sheathed house under construction with new windows stacked out front
12%

Building envelope

Interior finishes, glass and glazing, exterior finishes and roof coverings.

ICC G13 exam day: what you can bring and how booking works

The G13 is open book, but ICC decides what counts as a book. A tab that peels off or a loose note can cost you the exam, so set your book up to these rules before the first practice test.

ICC rules for the G13
Book the examOnline at pearsonvue.com/ICC, or by phone at 1-877-234-6082. National contractor exams need no pre-approval, and you can book as late as the day before if a seat is open.
Bring one IDAn original, unexpired, signed government photo ID whose name matches your registration exactly. A temporary license is not accepted, and a mismatch means no test and no refund.
Books you may useBound books, a three-ring binder or stapled pages. No photocopies of copyrighted books.
Notes and tabsNotes in ink or highlighter are allowed. Tabs must be permanently attached, the kind that tear the page if you pull them. No loose papers, and nothing slipped between the pages.
CalculatorA battery-powered, basic four-function calculator. No construction calculators and none that store formulas or print.
ReschedulingChange the date at least two business days ahead. Later than that, you pay the full exam fee.
ResultsOn screen as soon as you finish.
RetakesWait 10 days after a failed attempt and pay the fee again. ICC sets no limit on attempts unless your licensing board does.

From ICC’s candidate rules, support pages and 2018 bulletin, read November 17, 2026.

We found no ICC or Pearson VUE page that offers the G13 by remote proctoring. ICC says its contractor exams are given through Pearson, and Pearson’s ICC contractor page offers testing centers only. Plan on a test center.

For the passing score, ICC’s 2018 bulletin sends you to its Exam Catalog, and ICC’s support page says most contractor exams require at least 70% correct.

Which Colorado cities ask for the G13

We read 28 Front Range building departments on November 17, 2026. This is what each one names for the residential exam. None names the T13 yet.

What the city namesCities and counties
G13 by nameAurora (on its exam flyer), Colorado Springs, Fort Collins (2018 code year or newer), Jefferson County (passed within three years), Larimer County and Brighton
G13 or F13Denver (its page names the F13, and Denver also accepts the G13), Thornton, Parker, Boulder and Commerce City
F13 only, or F13 at minimumBoulder County names the F13. Arvada asks for “F13 min”
A newer codeLongmont takes its current code (2024) or one cycle back. Wheat Ridge asks for a 2021 or 2024 Class C test and names the G13-N in the same line
An ICC test, no exam IDLoveland, Centennial, Castle Rock, Littleton, Englewood and Castle Pines
No testDouglas County, Lakewood and Golden. Lone Tree issues no contractor license

The F13 retires for new registrations on December 1, 2026. If your city names only the F13, ask what it will take after that date. Our general contractor license guide has the full table with fees and insurance.

The 2018 International Residential Code on a desk in a Contractors of Colorado classroom

G13 or T13: is the T13 replacing the G13?

No. On December 1, 2026, ICC retires the 2015 edition of this exam, the F13, and opens a 2021 edition, the T13. The G13 stays available, and ICC has not published a date for retiring it.

ICC dropped its oldest edition when it added this new one, so expect the G13 to go the same way later. Until then your building department decides which exam ID it accepts. Ask before you buy a book, because a pass on the wrong edition may not count for your license.

Our class teaches the G13 today. We are adding a T13 class for contractors whose city asks for the 2021 exam. Book an intro meeting, tell us which exam your city wants, and we will point you to the right class.

  1. F132015 codesRetires December 1, 2026

    ICC stops taking new registrations.

  2. G132018 International Residential CodeAvailable

    The exam our class teaches today. No retirement date published.

  3. T132021 codesOpens December 1, 2026

    Sold in a 70% and a 75% passing score version.

The three editions of the ICC Residential Building Contractor (C) exam. Source: ICC contractor and trades bulletins, published October 12, 2026.

The T13 has the same 80 questions and four hours, and its outline adds a trade systems section: mechanical, electrical and plumbing. Our ICC T13 exam guide covers the rest.

Content areaG13 (2018 IRC)T13 (2021 IRC)
Permits and general regulations19%20%
Building planning and life safety19%30%
Structural systems50%30%
Building envelope12%15%
Trade systemsNone5%

Each exam lists one book: the 2018 IRC for the G13 and the 2021 IRC for the T13.

What you get in our G13 license exam prep

Contractors at long tables taking notes during a Contractors of Colorado exam prep class
A student raising a hand to ask the instructor a question in class
  • Four consecutive Saturdays, 8:00 AM to 12:00 PM, for 16 hours of live instruction
  • Licensed contractors who have taken these tests, teaching through a close read of the code book, practical examples and open Q&A
  • The 2018 IRC and an exam-approved tab kit
  • A class portal with progress tracking, plus mock exams and quizzes that mirror the real test
  • One-on-one office hours with your instructor
  • A recording of every session
  • Classes of 10 to 20 students, so you can ask a question and get an answer

Class locations and the fully online option

Lone Tree and Loveland run the same four-Saturday ICC G13 exam prep class. Plan to arrive by 7:50 AM. Parking is free at both. We also hold classes in Colorado Springs.

Lone Tree

In person or fully online by live stream
Address
9044 Forsstrom Dr, Lone Tree, CO 80124
Room
Large video wall for clear viewing and class discussion

Loveland

In person
Address
5825 McWhinney Blvd, Loveland, CO 80538

Colorado Springs

Ask us for the address and dates
Next step
Book an intro meeting

If you want an online general contractor course, take the Lone Tree class by live stream. Every session is streamed, so you can take all four Saturdays from home with the same instructors at the same price. We mail your code book and tab kit. Pay 5 to 7 days before the first class so they arrive in time.

Current dates are on our Colorado general contractor license classes page.

From the G13 class to your license

The path is the same in most Colorado cities. Your building department sets the details.

  1. Ask

    Ask your building department which exam ID it requires and how much documented experience it wants.

  2. Register

    Pick a location and start date, then hold your seat with the deposit.

  3. Attend

    Attend four Saturdays, and study in the portal between sessions.

  4. Test

    Take the G13 at a Pearson VUE testing center near you.

  5. Apply

    Apply for the license with your exam result, experience, insurance and business documents.

Class C usually covers single-family homes and small residential buildings. We also prepare contractors for the ICC G12, the exam for a Class B contractor license in Colorado.

Questions about the G13

Is the G13 a license or an exam?

An exam. When people say G13 contractor license, they mean the Class C residential license a city or county issues after you pass the G13 and apply.

Is the T13 replacing the G13?

Not on December 1, 2026. That day ICC retires the 2015 exam, the F13, and adds the T13 on the 2021 codes. The G13 stays available, and ICC has not published a retirement date for it.

Do you offer T13 exam prep?

We are adding it. The class we run today teaches the G13 on the 2018 IRC. If your city asks for the T13, book an intro meeting and tell us.

ICC G13 vs F13: what is the difference?

The code year. The F13 is written against the 2015 code and the G13 against the 2018 IRC. ICC stops taking F13 registrations on December 1, 2026.

Can I take the G13 class online?

Yes. Every session is live streamed from Lone Tree, so you can take the whole class online. We mail your code book and tab kit before the first Saturday.

Which ICC G13 book do I need?

The 2018 International Residential Code. ICC’s bulletin lists it as the reference for the G13. It comes with the class, along with an exam-approved tab kit.

Is there an ICC G13 practice test?

Yes, in the class portal. Its mock exams and quizzes mirror the real test, and you can take them between Saturdays.

How hard is the ICC G13 exam?

It is open book, but you get about three minutes a question. ICC’s own bulletin warns that you will not have time to look up every answer, so you need to know the book well before you sit down. We have not found pass rates published by ICC.

What score do I need to pass?

Ask your building department what it accepts. ICC’s 2018 bulletin points to its Exam Catalog for the G13 score, and ICC’s support page says most contractor exams require at least 70% correct. The T13 is sold in two versions, 70% and 75%, and the score is part of the exam ID.

Can I write in my code book or use sticky tabs?

You can bring a book with notes in ink or highlighter. Tabs must be permanently attached, so removable sticky tabs are out. Loose papers and pages slipped into the book are not allowed.

Can I take the ICC G13 exam online from home?

We found no ICC or Pearson VUE page that offers it. Pearson’s ICC contractor page lists testing centers only, so plan to test in person.

How soon can I retake the G13?

After 10 days. You pay the $120 fee again for each attempt, and ICC sets no limit on attempts unless your licensing board does.

What if I need to move my exam date?

Reschedule at least two business days ahead. Inside that window Pearson VUE charges the full exam fee.

Can you guarantee that I will pass?

No. Any school that promises a guaranteed pass is not being honest, because you are the one sitting the exam. If you attend every class, finish the full portal curriculum and do not pass on your first attempt, you can attend a future session at no additional cost.

Is there a study guide for the Colorado general contractor license exam?

Your tabbed 2018 IRC and the class portal are your study materials. Passing also takes study between Saturdays, following the study frameworks we give you, and speaking up in class.

Do I need experience to get the license after I pass?

Generally yes, though some jurisdictions do not require it. For a residential license you will typically need at least two years of hands-on residential experience that other general contractors will sign off on. Our Denver building department Q&A shows what one city asks for.

What happens if I miss a class?

We strongly recommend attending every session because each one builds on the last. If a conflict comes up, tell your instructor 48 hours ahead so we can help you stay on track. Enrollment is final, and we do not refund missed sessions.

Downtown Denver seen from the foothills at dusk, with neighborhoods below

Register for the G13 class

Four Saturdays in Lone Tree or Loveland, or fully online by live stream. The class costs $2,499 with the book, tab kit and portal included.